Metz actualiza el flash 36 AF-4 digital con soporte P-TTL para Pentax
Octubre 9, 2008
Hola,
siguiendo con las novedades de Metz en matería de flashes, ya tenemos disponible el flash 36 AF-4 digital en montura Pentax y soporte P-TTL.
El 36 AF-4 es un flash que ya lleva tiempo en el mercado aunque solo en monturas Canon y Nikon y ahora podemos disfrutarlo con nuestras pentax. Tiene un número guía máximo de 36 a ISO 100 y 85mm y reflector zoom manual.
Es un flah sencillo pero de buena calidad, siendo una buena opción de compra si no necesitamos las carcterísticas de sus hermanos mayores (48 AF-1 y 58 AF-1). También se puede actualizar el firmware pero en este caso solo es posible en el SAT de Metz.
Os copio sus espeficicaciones técnicas.
Flash output
- max. GN of 36 for ISO 100/21° and 85 mm
- high number of flashes (e.g. 450 full flashes with alkaline-magnesium batteries)
- Flash recycle time 0.1 – 6 secs (depending on the energy source and flash output)
Basic configuration
- Vertically-tilting reflector +90°
- LED displays
- Manual zoom reflector for 28 – 85 mm illumination
- Integrated autofocus measurement flash
- Flash standby and exposure control indicator on back of flash unit and in camera viewfinder
Basic flash functions
- TTL flash mode
- 1st and 2nd shutter curtain synchronisation (adjustable at camera)
- Manual flash exposure correction for TTL or automatic flash mode (only if adjustable on the camera)
- Automatic fill-in flash
Camera-specific flash functions
- E-TTL flash mode (Canon)
- i-TTL flash mode (Nikon / Fujifilm)
- P-TTL flash mode (Pentax / Samsung)
- Four-Thirds TTL flash mode (Olympus / Panasonic / Leica)
- ADI flash mode (Sony Alpha)
Prepared for the future
- Firmware update possible via Metz Service
Power sources
- 4 x AA alkaline-manganese batteries
- 4 x AA NC or NiMH rechargeable batteries
Entry Filed under: Accesorios. Etiquetas: Accesorios.









Trackback this post | Subscribe to the comments via RSS Feed